toshiba_t-series_support:toshiba_t3200sx
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
toshiba_t-series_support:toshiba_t3200sx [2021-09-01 01:52] omolini [Questions and Answers] |
toshiba_t-series_support:toshiba_t3200sx [2023-08-31 17:36] omolini |
||
|---|---|---|---|
| Line 63: | Line 63: | ||
| I'm missing the part number of the 80 MB Conner hard disk. If you know it, please let me know! | I'm missing the part number of the 80 MB Conner hard disk. If you know it, please let me know! | ||
| + | This system can be expanded with an 8-bit and 16-bit ISA expansion cards. Hence, you can purchase an XT-IDE adapter to add a hard drive, such as the XT-CF-MINI or XT-CF-Lite card to add a Compact Flash card as a hard drive. They usually run for $40-$60. You can find them on eBay. Check out [[http://www.malinov.com/Home/sergeys-projects/xt-cf-lite]] and [[https://shop.bluelavasystems.com/products/xt-cf-mini-bootable-8-bit-isa-cf-card-interface-xt-ide]] | ||
| + | |||
| + | Another option is to purchase an XT-IDE adapter for the Toshiba proprietary expansion slot. There is a maker on eBay that sells Toshiba type expansion cards with XT-IDE to allow many different types of IDE and CF cards to be used on the portable computer. | ||
| + | Please see the following link for the sales article. [[https://ebay.us/GO0Sk2|3inONEder: Toshiba Portables]] (affiliate link) | ||
| + | |||
| + | ==== Audio and ethernet ==== | ||
| + | The same adapter that allows you to use the Toshiba proprietary slot connector for XT-IDE and custom hard disks also optionally allows to add audio (Adlib) and ethernet support (partially NE2000 compatible). | ||
| + | Please see the following link for the item page. [[https://ebay.us/GO0Sk2|3inONEder: Toshiba Portables]] (affiliate link) | ||
| ==== CPU upgrades and overclocking ==== | ==== CPU upgrades and overclocking ==== | ||
| Line 87: | Line 95: | ||
| Unless you have the Toshiba external floppy – always set this to PRN. ((Source: http://baudband.net/?page_id=88)) | Unless you have the Toshiba external floppy – always set this to PRN. ((Source: http://baudband.net/?page_id=88)) | ||
| + | |||
| + | **Q: Can't boot from floppy, floppy not detected, or can't be read**\\ | ||
| + | **A:** Make sure the PRN-A-B switch is set to PRN (see above question about PRN-A-B switch. | ||
| **Q: My computer gives me a configuration error when I turn it on**\\ | **Q: My computer gives me a configuration error when I turn it on**\\ | ||
toshiba_t-series_support/toshiba_t3200sx.txt · Last modified: 2023-08-31 17:36 by omolini
Page Tools
